This M30 drone charging kit includes a data collecting box for battery and switch status, a landing gear frame, two charging contacts, and two connecting cables. Besides the charging function, this charging kit has four other features:

1. Remotely controlling the switch of drone power

2. No modification of drone or battery

3. Compatible with the DJI M30

4. Collecting the battery and switch status

HEISHA smart landing gear for drone docking system developers has two big advantages besides supporting the recharging of drones.

1. Provides a hub for multiple payloads’ remote controlling and power

2. Equipped with a powerful downward megaphone

This landing gear allows the collected data to be transferred even after the drone battery is off work, it can also provide a power supply for the payloads, instead of taking the valuable battery capacity from the drone.

This HEISHA M300 drone charging kit includes landing gear and a charger.
The landing gear can realize the electric control of switching the DJI M300, and obtain the actual state of the switch machine, as well as the real-time current and voltage values. The charging contact pins on the charging stand have been specially treated for water, dust, and oxidation. The whole module is die sinking for structural stability and a lower cost.
The charger part is smaller in size, and lower in cost and failure rate because it does not need an external communication module, and can charge two batteries simultaneously. In addition, the charger’s intelligent and safe charging control can prevent overheating of charging.
The most important thing is that it is highly compatible and can be widely compatible with 6s-12s drone batteries.

Besides the DJI Mavic series, this retrofitted landing gear is compatible with any 2s-4s drones (Skydio, Autel, Parrot, etc. ) and works with any drone charging platforms that support the 485 protocol.

There is a built-in control board for drone charging to provide feedback on the real-time status of the drone, including the power situation and values of current and voltage, multiple charging protections are added to ensure charging safety, such as over-current, over-voltage, and anti-reverse connection.

These retrofitted landing gears are for DJI Matrice300, Matrice200, and other 4s-12s LiPo battery-powered drones. It works with any drone charging docks that support the standard 485 protocol.

Its charging control board can help you to monitor the drone’s power situation, current, and voltage. Over-current, over-voltage, and anti-reverse connections are added to guarantee safety in the drone charging process.